INPA/EDIABAS, GT1, SSS. (Diagnose, coding / programming).
Complete support of all blocks of management on all models BMW since 1998!
Supports reports: 
1. High-speed D-CAN and PT-CAN (500 kbit/s)
2. Low - speed K-CAN (100 kbit/s)
3. Standard BMW reports (BMW-OBD-interface).
D-CAN It is used for diagnostics of the following models:
- E60, E61 since 03/2007
- E83 since 09/2006 
 - E81, E87 since 03/2007
- E90, E91, E92, E93 since 03/2007 
- E70 (new X5)
- R56 (new MINI)
PT-CAN And K-CAN it is applied:
For work with blocks of management ? on a table ? without the automobile.
Standard BMW-OBD-interface it is used for diagnostics: 
With 1995 for 1998 (except for old blocks of management using L-line).
With 1998 for 03/2007 years on all models.



<install:>

0¡¢install DiagHead.exe  <if your OS is XP,you need install .net framework 2.0 software> 
1¡¢VMware-player-2.5.0-118166_PConline
2¡¢copy inpa all file to c:\.
3¡¢copy gt1 software to c:
4¡¢edit system path ,add c:\ediabas\bin\ path(syspath.jpg)
5¡¢Connect USB cable and instal FTDI drivers.
6¡¢install d-can usb device(CDM 2.04.06 WHQL Certified.rar)

7¡¢Record your COM port number (number.jpg) <if COM PORT than com4,you need change com port to com2 or com1 or other>
8¡¢Setup "Latensy Timer = 1" (L_timer.jpg)
9¡¢Set c:\ediabas\hardware\obd\obd.ini PORT=comX £¨your USB-COM port number£©
10. Run c:\ediabas\hardware\obd\OBDSetup.exe
11. Restart Windows
12¡¢change  main network Adapter ip to 192.168.68.1,please dont change VMware network Adapter ip
13¡¢change to c:\ediabas\bin\EDIABAS.ini Port= 6801




<run>
inpa  c:\inpa\bin\inpa.exe

gt1(need set network ip address )
   1¡¢run c:\ediabas\bin\IFHSrv32.exe
   2¡¢run DiagHead.exe
   3¡¢select diaghead <run> menu
   4¡¢run vwware
   5¡¢open c:\gt1\DIS 55 English\DIS 55 English.vmdk()

   <first time run gt1,you need do this,gt1 will need find & steup  d-can interface>

   6¡¢click <administration> button(in gt1 software main screen)
   7¡¢click <connection setup> button
   8¡¢click <connecting> button
   9¡¢click <menu>-><end>--<quit> buttion (to back to main screen)
 
    to work correctly with the device, in VMPlayer set Ethernet1, Ethernet2, Ethernet3 to "Connected", "Bridged". master PC network settings must be the following:
     - IP 192.168.68.1 
     - subnet mask 255.255.255.0 
     - gateway 192.168.68.1


    note:
        if notebook not connect network cables,please insert  Loopback cables
        please dont change  Ethernet2, Ethernet3 ip address

        Don't use USB Extender cable, directly connect interface to computer.


        <<<<**********you need close your Firewall software,if you not close Firewall , gt1 not can connect you diaghead